Allowed standalone flags: –all-proxy, –allow-overwrite, –allow-piece-length-change, –always-resume, –async-dns, –auto-file-renaming, –auto-save-interval, –bt-detach-seed-only, –bt-enable-hook-after-hash-check, –bt-enable-lpd, –bt-exclude-tracker, –bt-force-encryption, –bt-hash-check-seed, –bt-load-saved-metadata, –bt-meta-data, –bt-metadata-only, –bt-min-crypto-level, –bt-prioritize-piece, –bt-remove-unselected-file, –bt-request-peer-speed-limit, –bt-require-crypto, –bt-save-metadata, –bt-seed-unverified, –bt-stop-timeout, –bt-tracker, –bt-tracker-connect-timeout, –bt-tracker-interval, –bt-tracker-timeout, –ca-certificate, –certificate, –check-certificate, –check-integrity, –checksum, –conditional-get, –conf-path, –connect-timeout, –console-log-level, –content-disposition-default-utf8, –continue, –daemon, –deferred-input, –dht-entry-point, –dht-entry-point6, –dht-file-path, –dht-file-path6, –dht-listen-addr6, –dht-listen-port, –dht-message-timeout, –dir, –disable-ipv6, –disk-cache, –dns-timeout, –download-result, –dscp, –enable-async-dns, –enable-color, –enable-dht, –enable-dht6, –enable-http-keep-alive, –enable-http-pipelining, –enable-mmap, –enable-peer-exchange, –enable-rpc, –event-poll, –exclude-domains, –exclude-paths, –ftp-passwd, –ftp-pasv, –ftp-proxy, –ftp-user, –header, –help, –http-accept-gzip, –http-auth-challenge, –http-no-cache, –http-passwd, –http-proxy, –http-user, –https-proxy, –human-readable, –index-out, –input-file, –keep-unfinished-download-result, –listen-port, –load-cookies, –log, –log-level, –lowest-speed-limit, –max-concurrent-downloads, –max-connection-per-server, –max-download-limit, –max-download-result, –max-file-not-found, –max-mmap-limit, –max-overall-download-limit, –max-overall-upload-limit, –max-resume-failure-tries, –max-tries, –max-upload-limit, –metalink-base-uri, –metalink-enable-unique-protocol, –metalink-file, –metalink-language, –metalink-location, –metalink-os, –metalink-preferred-protocol, –metalink-server, –metalink-version, –min-split-size, –min-tls-version, –multiple-interface, –netrc-path, –no-conf, –no-file-allocation-limit, –no-netrc, –no-want-digest-header, –on-bt-download-complete, –on-download-complete, –on-download-error, –on-download-pause, –on-download-start, –on-download-stop, –out, –parameterized-uri, –pause, –pause-metadata, –peer-id-prefix, –peer-agent, –piece-length, –private-key, –proxy-method, –quiet, –realtime-chunk-checksum, –referer, –remote-time, –remove-control-file, –retry-wait, –reuse-uri, –rpc-allow-origin-all, –rpc-listen-all, –rpc-listen-port, –rpc-max-request-size, –rpc-passwd, –rpc-save-upload-metadata, –rpc-secret, –rpc-secure, –rpc-user, –save-cookies, –save-not-found, –save-session, –save-session-interval, –seed-ratio, –seed-time, –select-file, –server-stat-of, –server-stat-timeout, –show-console-readout, –show-files, –socket-recv-buffer-size, –ssh-host-key-md, –split, –stderr, –stop, –stop-with-process, –stream-piece-selector, –summary-interval, –timeout, –torrent-file, –truncate-console-readout, –uri-selector, –use-head, –user-agent, –version, -D, -V, -Z, -c, -d, -h, -i, -j, -l, -m, -n, -o, -q, -s, -t, -v, -x
Allowed valued flags: –all-proxy, –all-proxy-passwd, –all-proxy-user, –bt-tracker, –ca-certificate, –certificate, –checksum, –conf-path, –connect-timeout, –console-log-level, –continue, –dht-entry-point, –dht-file-path, –dir, –disk-cache, –dns-timeout, –exclude-paths, –ftp-passwd, –ftp-proxy, –ftp-user, –header, –http-passwd, –http-proxy, –http-user, –https-proxy, –index-out, –input-file, –listen-port, –load-cookies, –log, –log-level, –lowest-speed-limit, –max-concurrent-downloads, –max-connection-per-server, –max-download-limit, –max-overall-download-limit, –max-overall-upload-limit, –max-tries, –max-upload-limit, –metalink-file, –min-split-size, –out, –parameterized-uri, –proxy-method, –referer, –retry-wait, –rpc-listen-port, –rpc-passwd, –rpc-secret, –rpc-user, –save-cookies, –save-session, –seed-ratio, –seed-time, –select-file, –server-stat-of, –split, –stderr, –summary-interval, –timeout, –torrent-file, –uri-selector, –user-agent, -T, -U, -c, -d, -i, -j, -l, -m, -n, -o, -s, -t, -x
Hyphen-prefixed positional arguments accepted

`arp`

https://man7.org/linux/man-pages/man8/arp.8.html

Allowed standalone flags: –help, –version, -?, -D, -H, -I, -N, -V, -a, -d, -e, -i, -n, -s, -v
Allowed valued flags: -A, -H, -I, -f, -i, -s
Bare invocation allowed
Hyphen-prefixed positional arguments accepted

`arping`

https://man7.org/linux/man-pages/man8/arping.8.html

Allowed standalone flags: –help, –version, -A, -D, -U, -V, -b, -f, -h, -q, -v
Allowed valued flags: -c, -I, -i, -s, -S, -T, -w
Hyphen-prefixed positional arguments accepted

`autossh`

https://www.harding.motd.ca/autossh/

Allowed standalone flags: –help, -V, -h

`caddy`

https://caddyserver.com/docs/command-line

adapt: Flags: –help, –pretty, –validate, -p, -h. Valued: –adapter, –config
build-info: Flags: –help, -h
completion: Flags: –help, -h. Positional args accepted
environ: Flags: –help, -h
fmt: Flags: –diff, –help, –overwrite, -h, -o. Positional args accepted
hash-password: Flags: –help, -h. Valued: –algorithm, –plaintext
help: Positional args accepted
list-modules: Flags: –help, –packages, –versions, -h
manpage: Flags: –help, -h. Valued: –directory
validate: Flags: –config, –help, -h. Valued: –adapter, –config
version: Flags: –help, -h
Allowed standalone flags: –help, –version, -h, -v

`curl`

https://curl.se/docs/manpage.html

Allowed standalone flags: –compressed, –fail, –globoff, –head, –include, –insecure, –ipv4, –ipv6, –location, –no-buffer, –no-progress-meter, –show-error, –silent, –verbose, -4, -6, -I, -L, -N, -S, -f, -g, -i, -k, -s, -v.
Allowed valued flags: –connect-timeout, –max-time, –user-agent, –write-out, -A, -m, -w.
Allowed methods (-X/–request): GET, HEAD, OPTIONS.
-H/–header allowed with safe headers (Accept, User-Agent, Authorization, Cookie, Cache-Control, Range, etc.).
-o/–output and -O/–remote-name allowed (writes files).

`delv`

https://bind9.readthedocs.io/en/latest/manpages.html#delv-dns-lookup-and-validation-utility

Allowed standalone flags: -4, -6, -h, -i, -m, -v
Allowed valued flags: -a, -b, -c, -d, -p, -q, -t, -x
Bare invocation allowed

`dig`

https://man7.org/linux/man-pages/man1/dig.1.html

Allowed standalone flags: –help, –version, -4, -6, -V, -h, -m, -r, -u, -v
Allowed valued flags: -b, -c, -f, -k, -p, -q, -t, -x, -y
Bare invocation allowed

`dns-sd`

https://developer.apple.com/library/archive/documentation/Networking/Conceptual/dns_discovery_api/Introduction.html

Requires -E, -F, -B, -L, -q, -G, -Z, -V. - Allowed standalone flags: -E, -F, -B, -L, -q, -G, -Z, -V, -4, -6

`doggo`

https://doggo.mrkaran.dev/

Allowed standalone flags: –aa, –ad, –any, –cd, –color, –cookie, –debug, –do, –ede, –help, –ipv4, –ipv6, –json, –nsid, –padding, –rd, –reverse, –search, –short, –skip-hostname-verification, –time, –version, –z, -4, -6, -J, -h, -x
Allowed valued flags: –bufsize, –class, –ecs, –gp-from, –gp-limit, –nameserver, –ndots, –query, –strategy, –tls-hostname, –type, -c, -n, -q, -t
Hyphen-prefixed positional arguments accepted

Examples:

doggo example.com
doggo example.com @1.1.1.1
doggo example.com MX
doggo example.com @tls://1.1.1.1 --skip-hostname-verification
doggo --json example.com
doggo -t AAAA example.com

`envoy`

https://www.envoyproxy.io/docs/envoy/latest/operations/cli

Allowed standalone flags: –help, –version, –hot-restart-version, -h, -?

`fping`

https://www.fping.org/

Requires -c, –count, -C, –vcount, -x, –reachable, -X, –fast-reachable. - Allowed standalone flags: –help, –version, –ipv4, –ipv6, –alive, –addr, –rdns, –timestamp, –elapsed, –dontfrag, –name, –netdata, –outage, –quiet, –random, –stats, –unreach, –loop, –all, -4, -6, -a, -A, -d, -D, -e, -h, -l, -M, -m, -n, -N, -o, -q, -R, -s, -u, -v
Allowed valued flags: –size, –backoff, –count, –vcount, –file, –generate, –ttl, –iface, –interval, –tos, –period, –squiet, –retry, –src, –timeout, –reachable, –fast-reachable, -b, -B, -c, -C, -f, -g, -H, -i, -I, -O, -p, -Q, -r, -S, -t, -T, -x, -X

`grpcurl`

https://github.com/fullstorydev/grpcurl

Allowed standalone flags: –help, -H, -allow-unknown-fields, -authority, -cacert, -cert, -connect-timeout, -d, -emit-defaults, -expand-headers, -format, -format-error, -help, -import-path, -insecure, -keepalive-time, -key, -keysize-options, -max-msg-sz, -max-time, -msg-template, -plaintext, -proto, -protoset, -protoset-out, -rpc-header, -servername, -unix, -use-reflection, -userconfig, -v, -V, -vv, -version
Allowed valued flags: -H, -authority, -cacert, -cert, -connect-timeout, -d, -format, -format-error, -import-path, -keepalive-time, -key, -keysize-options, -max-msg-sz, -max-time, -msg-template, -proto, -protoset, -protoset-out, -rpc-header, -servername, -unix, -userconfig
Hyphen-prefixed positional arguments accepted

`haproxy`

https://docs.haproxy.org/3.0/management.html

Allowed standalone flags: –help, -V, -c, -d, -h, -q, -v, -vv
Allowed valued flags: -D, -N, -W, -f, -n, -p, -st

`host`

https://man7.org/linux/man-pages/man1/host.1.html

Allowed standalone flags: –help, –version, -4, -6, -C, -V, -a, -c, -d, -h, -l, -r, -s, -v
Allowed valued flags: -D, -N, -R, -T, -W, -i, -m, -t

`httpyac`

https://httpyac.github.io/guide/cli.html

Allowed standalone flags: –help, –version, -h, -v

`hurl`

https://hurl.dev/docs/manual.html

Allowed standalone flags: –color, –compressed, –connect-to, –continue-on-error, –cookie-jar, –curl, –debug, –digest, –error-format, –file-root, –from-entry, –glob, –help, –http1.0, –http1.1, –http2, –http3, –include, –insecure, –interactive, –ipv4, –ipv6, –json, –location, –location-trusted, –max-filesize, –max-redirs, –max-time, –negotiate, –netrc, –netrc-file, –netrc-optional, –no-assert, –no-color, –no-cookie-store, –no-output, –no-pretty, –ntlm, –output, –parallel, –path-as-is, –pretty, –progress-bar, –proxy, –report-html, –report-json, –report-junit, –report-tap, –repeat, –report-html-history, –resolve, –retry, –retry-interval, –ssl-no-revoke, –summary, –test, –to-entry, –unix-socket, –user, –user-agent, –variable, –variables-file, –verbose, –very-verbose, –version, -0, -?, -4, -6, -A, -H, -L, -M, -V, -X, -b, -c, -d, -h, -i, -k, -l, -m, -n, -o, -q, -r, -s, -u, -v, -vv
Allowed valued flags: –aws-sigv4, –cacert, –cert, –connect-timeout, –connect-to, –cookie, –cookie-jar, –delay, –error-format, –file-root, –from-entry, –glob, –jobs, –key, –limit-rate, –max-filesize, –max-redirs, –max-time, –netrc-file, –no-proxy, –output, –parallel, –pinnedpubkey, –proxy, –report-html, –report-junit, –report-tap, –repeat, –resolve, –retry, –retry-interval, –secret, –secrets-file, –socks5, –to-entry, –unix-socket, –user, –user-agent, –variable, –variables-file, –verbosity, –workers, -A, -E, -H, -X, -b, -c, -d, -m, -o, -r, -u, -x
Hyphen-prefixed positional arguments accepted

`ifconfig`

https://man7.org/linux/man-pages/man8/ifconfig.8.html

Allowed standalone flags: –help, –version, -L, -V, -a, -h, -l, -s, -v
Bare invocation allowed

`ip2cc`

https://metacpan.org/dist/IP-Country

Bare invocation allowed

`ipcalc`

https://jodies.de/ipcalc

Allowed standalone flags: –class, –deaggregate, –help, –html, –nobinary, –nocolor, –split, –version, -b, -c, -d, -h, -n, -s, -v

Examples:

ipcalc 192.168.1.0/24
ipcalc 10.0.0.0 255.0.0.0
ipcalc --html 192.168.1.0/24
ipcalc --deaggregate 192.168.0.0-192.168.5.255
ipcalc --split 192.168.1.0/24 64 64 64
ipcalc --version

`ipconfig`

https://developer.apple.com/library/archive/documentation/Networking/Conceptual/SystemConfigFrameworks/SC_Intro/SC_Intro.html

getdhcpduid
getdhcpiaid
getifaddr
getiflist
getoption
getpacket
getra
getsummary
getv6packet
ifcount
waitall

`ipfs`

https://docs.ipfs.tech/reference/kubo/cli/

block get: Positional args accepted
block stat: Positional args accepted
bootstrap list: Positional args accepted
cat: Positional args accepted
cid: Positional args accepted
completion: Flags: –help, -h. Positional args accepted
dag get: Positional args accepted
dag resolve: Positional args accepted
dag stat: Positional args accepted
dht findpeer: Positional args accepted
dht findprovs: Positional args accepted
dht get: Positional args accepted
dht query: Positional args accepted
help: Positional args accepted
id: Positional args accepted
key list: Positional args accepted
ls: Positional args accepted
name resolve: Positional args accepted
pin ls: Positional args accepted
pin verify: Positional args accepted
refs: Positional args accepted
repo stat: Positional args accepted
repo verify: Positional args accepted
repo version: Positional args accepted
swarm addrs: Positional args accepted
swarm peers: Positional args accepted
version: Positional args accepted
Allowed standalone flags: –help, –version, -h, -v

`ippfind`

https://openprinting.github.io/cups/doc/man-ippfind.html

Allowed standalone flags: –help, –version, –false, –ls, –local, –print, –print-name, –quiet, –remote, –true, –not, –and, –or, -4, -6, -l, -p, -q, -r, -s
Allowed valued flags: –domain, –host, –literal-name, –name, –path, –port, –txt, –uri, -T, -V, -N, -P, -d, -h, -n, -t, -u
Bare invocation allowed

`ipptool`

https://openprinting.github.io/cups/doc/man-ipptool.html

Allowed standalone flags: –help, –stop-after-include-error, –version, -4, -6, -C, -E, -I, -L, -S, -X, -c, -h, -l, -q, -t, -v
Allowed valued flags: -T, -V, -d, -f, -i, -n

`ldapcompare`

https://www.openldap.org/software/man.cgi?query=ldapcompare

Allowed standalone flags: -n, -v, -z, -M, -MM, -x, -W, -I, -Q, -Z, -ZZ
Allowed valued flags: -d, -D, -w, -y, -H, -h, -p, -P, -e, -E, -O, -U, -R, -X, -Y

`ldapsearch`

https://www.openldap.org/software/man.cgi?query=ldapsearch

Allowed standalone flags: -n, -c, -u, -v, -A, -M, -MM, -L, -LL, -LLL, -x, -W, -I, -Q, -Z, -ZZ
Allowed valued flags: -S, -d, -f, -D, -w, -y, -H, -h, -p, -b, -s, -a, -P, -e, -E, -l, -z, -O, -U, -R, -X, -Y
Bare invocation allowed

`ldapurl`

https://www.openldap.org/software/man.cgi?query=ldapurl

Allowed valued flags: -a, -b, -e, -E, -f, -H, -h, -p, -s, -S
Bare invocation allowed

`ldapwhoami`

https://www.openldap.org/software/man.cgi?query=ldapwhoami

Allowed standalone flags: -n, -v, -z, -x, -W, -I, -Q, -Z, -ZZ
Allowed valued flags: -d, -D, -w, -y, -H, -h, -p, -e, -E, -O, -U, -R, -X, -Y
Bare invocation allowed

`masscan`

https://github.com/robertdavidgraham/masscan

Allowed standalone flags: –echo, –echo-cidr, –exclude, –excludefile, –help, –http-user-agent, –includefile, –ping, –rate, –randomize-hosts, –reason, –retries, –source-ip, –source-port, –ttl, –user-agent, –version, –wait, -?, -c, -d, -h, -iL, -iR, -oG, -oJ, -oL, -oU, -oX, -p, -v
Allowed valued flags: –banners, –config, –exclude, –excludefile, –http-user-agent, –includefile, –output-filename, –output-format, –rate, –readscan, –retries, –rotate, –rotate-dir, –source-ip, –source-port, –ttl, –wait, -c, -iL, -iR, -oG, -oJ, -oL, -oU, -oX, -p, -r, -w
Hyphen-prefixed positional arguments accepted

`mdfind`

https://ss64.com/mac/mdfind.html

Allowed standalone flags: –help, –version, -0, -V, -count, -h, -interpret, -literal, -live
Allowed valued flags: -attr, -name, -onlyin, -s

`mosh`

https://mosh.org/

Allowed standalone flags: –help, –version, -h

`mtr`

https://man7.org/linux/man-pages/man8/mtr.8.html

Allowed standalone flags: –help, –no-dns, –report, –report-wide, –show-ips, –version, -4, -6, -V, -b, -h, -n, -r, -w
Allowed valued flags: –address, –count, –interval, –max-ttl, –psize, –report-cycles, –type, -I, -a, -c, -i, -m, -s

`nc`

https://man.openbsd.org/nc.1

Requires -z. - Allowed standalone flags: –help, -h, -z, -v, -n, -u, -4, -6
Allowed valued flags: -w

`ncat`

https://nmap.org/ncat/

Requires -z. - Allowed standalone flags: –help, -h, –version, -z, -v, -n, -u, -4, -6
Allowed valued flags: -w, –wait

`netstat`

https://man7.org/linux/man-pages/man8/netstat.8.html

Allowed standalone flags: –all, –continuous, –extend, –groups, –help, –interfaces, –listening, –masquerade, –numeric, –numeric-hosts, –numeric-ports, –numeric-users, –program, –route, –statistics, –symbolic, –tcp, –timers, –udp, –unix, –verbose, –version, –wide, -A, -C, -L, -M, -N, -R, -S, -V, -W, -Z, -a, -b, -c, -d, -e, -f, -g, -h, -i, -l, -m, -n, -o, -p, -q, -r, -s, -t, -u, -v, -w, -x
Allowed valued flags: -I
Bare invocation allowed

`nginx`

https://nginx.org/en/docs/switches.html

Allowed standalone flags: –help, -?, -V, -h, -q, -t, -T, -v
Allowed valued flags: -c, -e, -g, -p, -s

`nmap`

https://nmap.org/book/man.html

Allowed standalone flags: –help, –version, -h, -V, -sT, -sn, -sP, -sL, -sV, -Pn, -PE, -PP, -PM, -F, –open, –reason, –traceroute, -n, -R, -4, -6, -v, -vv, -vvv, -d, -d1, -d2, -d3, -d4, -d5, -d6, -d7, -d8, -d9, –packet-trace, –no-stylesheet, -T0, -T1, -T2, -T3, -T4, -T5, –system-dns, –version-light, –version-all
Allowed valued flags: -p, –exclude-ports, –top-ports, –port-ratio, –max-retries, –host-timeout, –scan-delay, –max-scan-delay, –min-rate, –max-rate, –min-parallelism, –max-parallelism, –min-hostgroup, –max-hostgroup, –min-rtt-timeout, –max-rtt-timeout, –initial-rtt-timeout, –exclude, –dns-servers, -e, –source-port, -g, –ttl, –version-intensity

`nslookup`

https://man7.org/linux/man-pages/man1/nslookup.1.html

Allowed: positional args, -debug, -nodebug, -d2, and valued options (-type=, -query=, -port=, -timeout=, -retry=, -class=, -domain=, -querytype=).

`oha`

https://github.com/hatoo/oha

Allowed standalone flags: –debug, –disable-color, –disable-compression, –disable-keepalive, –http2, –help, –insecure, –ipv4, –ipv6, –latency-correction, –no-tui, –reason-codes, –stats-success-breakdown, –use-mode, –version, -A, -H, -V, -a, -c, -d, -h, -m, -n, -q, -r, -t, -z
Allowed valued flags: –burst-delay, –burst-rate, –connect-to, –dns-resolver, –dump-urls, –exit-stage-key, –ip-strategy, –max-redirects, –method, –output-format, –proxy, –proxy-http-version, –proxy-username, –proxy-password, –rand-regex-url, –redirect, –redirect-uri, –reproduce-rng-seed, –timeout, –unix-socket, –user-agent, –wait-ongoing-requests-after-deadline, -A, -D, -H, -T, -U, -c, -d, -m, -n, -q, -r, -t, -z
Hyphen-prefixed positional arguments accepted

`pcp-htop`

https://man.archlinux.org/man/pcp-htop.1.en

Allowed standalone flags: –help, –no-color, –no-colour, –no-function-bar, –no-meters, –no-mouse, –no-unicode, –readonly, –tree, –version, -C, -M, -U, -V, -h, -t
Allowed valued flags: –delay, –drop-capabilities, –filter, –highlight-changes, –pid, –sort-key, –user, -F, -H, -d, -p, -s, -u
Bare invocation allowed

`ping`

https://man7.org/linux/man-pages/man8/ping.8.html

Requires -c, –count. - Allowed standalone flags: -4, -6, -D, -O, -R, -a, -d, -n, -q, -v, –help, -h, –version, -V
Allowed valued flags: –count, –deadline, –interface, –interval, –ttl, -I, -Q, -S, -W, -c, -i, -l, -s, -t, -w

`protoc`

https://protobuf.dev/programming-guides/proto3/

Allowed standalone flags: –help, –version, -h

`route`

https://man7.org/linux/man-pages/man8/route.8.html

Allowed subcommands: get, monitor, print, show
Allowed flags: -4, -6, -n, -v
Bare invocation allowed

`scp`

https://man.openbsd.org/scp

Allowed standalone flags: –help, -3, -4, -6, -A, -B, -C, -D, -O, -P, -R, -T, -d, -h, -p, -q, -r, -v, -x
Allowed valued flags: -D, -F, -J, -P, -S, -c, -i, -l, -o, -s
Hyphen-prefixed positional arguments accepted

`sftp`

https://man.openbsd.org/sftp

Allowed standalone flags: –help, -?, -h

`snmpbulkget`

https://net-snmp.sourceforge.io/docs/man/snmpbulkget.html

Allowed standalone flags: -d, -h, –help, -H, -V, –version
Allowed valued flags: -D, -I, -L, -m, -M, -O, -P, -r, -t, -v, -Y, -l, -n, -a, -A, -e, -E, -u, -x, -X, -Z, -c, -Cn, -Cr

`snmpbulkwalk`

https://net-snmp.sourceforge.io/docs/man/snmpbulkwalk.html

Allowed standalone flags: -d, -h, –help, -H, -V, –version, -Cc, -Ci, -Cp
Allowed valued flags: -D, -I, -L, -m, -M, -O, -P, -r, -t, -v, -Y, -l, -n, -a, -A, -e, -E, -u, -x, -X, -Z, -c, -Cn, -Cr

`snmpdelta`

https://net-snmp.sourceforge.io/docs/man/snmpdelta.html

Allowed standalone flags: -d, -h, –help, -H, -V, –version, -Cf, -Ct, -Cs, -CS, -Cm, -Ck, -CT
Allowed valued flags: -D, -I, -L, -m, -M, -O, -P, -r, -t, -v, -Y, -l, -n, -a, -A, -e, -E, -u, -x, -X, -Z, -c, -CF, -Cp, -CP, -Cv

`snmpdf`

https://net-snmp.sourceforge.io/docs/man/snmpdf.html

Allowed standalone flags: -d, -h, –help, -H, -V, –version, -Cu
Allowed valued flags: -D, -I, -L, -m, -M, -O, -P, -r, -t, -v, -Y, -l, -n, -a, -A, -e, -E, -u, -x, -X, -Z, -c

`snmpget`

https://net-snmp.sourceforge.io/docs/man/snmpget.html

Allowed standalone flags: -d, -h, –help, -H, -V, –version, -Cf
Allowed valued flags: -D, -I, -L, -m, -M, -O, -P, -r, -t, -v, -Y, -l, -n, -a, -A, -e, -E, -u, -x, -X, -Z, -c

`snmpgetnext`

https://net-snmp.sourceforge.io/docs/man/snmpgetnext.html

Allowed standalone flags: -d, -h, –help, -H, -V, –version, -Cf
Allowed valued flags: -D, -I, -L, -m, -M, -O, -P, -r, -t, -v, -Y, -l, -n, -a, -A, -e, -E, -u, -x, -X, -Z, -c

`snmpnetstat`

https://net-snmp.sourceforge.io/docs/man/snmpnetstat.html

Allowed standalone flags: -d, -h, –help, -H, -V, –version, -Ca, -Cn, -Ci, -Co, -Cr, -Cs
Allowed valued flags: -D, -I, -L, -m, -M, -O, -P, -r, -t, -v, -Y, -l, -n, -a, -A, -e, -E, -u, -x, -X, -Z, -c, -CI, -Cp

`snmpstatus`

https://net-snmp.sourceforge.io/docs/man/snmpstatus.html

Allowed standalone flags: -d, -h, –help, -H, -V, –version, -Cf
Allowed valued flags: -D, -I, -L, -m, -M, -O, -P, -r, -t, -v, -Y, -l, -n, -a, -A, -e, -E, -u, -x, -X, -Z, -c

`snmptable`

https://net-snmp.sourceforge.io/docs/man/snmptable.html

Allowed standalone flags: -d, -h, –help, -H, -V, –version, -Cb, -CB, -Ch, -CH, -Ci, -Cl
Allowed valued flags: -D, -I, -L, -m, -M, -O, -P, -r, -t, -v, -Y, -l, -n, -a, -A, -e, -E, -u, -x, -X, -Z, -c, -Cc, -Cf, -Cr, -Cw

`snmptest`

https://net-snmp.sourceforge.io/docs/man/snmptest.html

Allowed standalone flags: -d, -h, –help, -H, -V, –version
Allowed valued flags: -D, -I, -L, -m, -M, -O, -P, -r, -t, -v, -Y, -l, -n, -a, -A, -e, -E, -u, -x, -X, -Z, -c

`snmptranslate`

https://net-snmp.sourceforge.io/docs/man/snmptranslate.html

Allowed standalone flags: -h, –help, -V, –version, -Td, -Tp, -Ta, -Tl, -To, -Ts, -Tt, -Tz, -Tb, -Tn, -On, -Of, -Os, -OS, -OU
Allowed valued flags: -D, -I, -L, -m, -M, -O, -P, -w
Bare invocation allowed

`snmpwalk`

https://net-snmp.sourceforge.io/docs/man/snmpwalk.html

Allowed standalone flags: -d, -h, –help, -H, -V, –version, -Cc, -Ci, -CI, -Cp, -Ct
Allowed valued flags: -D, -I, -L, -m, -M, -O, -P, -r, -t, -v, -Y, -l, -n, -a, -A, -e, -E, -u, -x, -X, -Z, -c, -CE

`sntp`

https://www.eecis.udel.edu/~mills/ntp/html/sntp.html

Allowed standalone flags: –help, –version, –ipv4, –ipv6, –authentication, –broadcast, –concurrent, –usereservedport, –wait, -?, -4, -6, -a, -b, -c, -d, -r
Allowed valued flags: –bctimeout, –debug-level, –set-debug-level, –gap, –keyfile, –ntpversion, –steplimit, –uctimeout, -B, -D, -g, -k, -M, -n, -o, -t, -u

`ss`

https://man7.org/linux/man-pages/man8/ss.8.html

Allowed standalone flags: –all, –dccp, –extended, –family, –help, –info, –ipv4, –ipv6, –listening, –memory, –no-header, –numeric, –oneline, –options, –packet, –processes, –raw, –resolve, –sctp, –summary, –tcp, –tipc, –udp, –unix, –version, –vsock, -0, -4, -6, -E, -H, -O, -V, -a, -e, -h, -i, -l, -m, -n, -o, -p, -r, -s, -t, -u, -w, -x
Allowed valued flags: –filter, –query, -A, -F, -f
Bare invocation allowed

`ssh-add`

https://man.openbsd.org/ssh-add

Allowed standalone flags: –help, -?, -A, -D, -K, -L, -T, -V, -X, -c, -d, -h, -k, -l, -q, -v, -x
Allowed valued flags: -E, -H, -O, -S, -T, -W, -c, -e, -h, -s, -t
Bare invocation allowed
Hyphen-prefixed positional arguments accepted

`ssh-agent`

https://man.openbsd.org/ssh-agent

Allowed standalone flags: –help, -?, -D, -c, -d, -h, -k, -q, -s, -v
Allowed valued flags: -E, -O, -P, -a, -t
Bare invocation allowed

Examples:

ssh-agent
ssh-agent -s
eval "$(ssh-agent)"
eval "$(ssh-agent -s)"
eval "$(ssh-agent -s -k)"

`ssh-copy-id`

https://man.openbsd.org/ssh-copy-id

Allowed standalone flags: –help, -f, -h, -n, -s, -x
Allowed valued flags: -i, -o, -p, -t
Hyphen-prefixed positional arguments accepted

`ssh-keygen`

https://man.openbsd.org/ssh-keygen

Allowed standalone flags: –help, -?, -A, -B, -D, -E, -F, -G, -H, -I, -K, -L, -M, -N, -O, -P, -Q, -R, -S, -T, -U, -V, -W, -Y, -a, -b, -c, -e, -f, -g, -h, -i, -k, -l, -m, -n, -o, -p, -q, -r, -s, -t, -u, -v, -w, -x, -y, -z
Allowed valued flags: -A, -B, -D, -E, -F, -G, -I, -K, -M, -N, -O, -P, -Q, -R, -S, -T, -V, -W, -Y, -a, -b, -e, -f, -h, -i, -k, -m, -n, -o, -r, -s, -t, -u, -w, -z

`ssh-keyscan`

https://man.openbsd.org/ssh-keyscan

Allowed standalone flags: –help, -4, -6, -D, -H, -O, -c, -h, -q, -v
Allowed valued flags: -T, -c, -f, -O, -p, -t
Hyphen-prefixed positional arguments accepted

`sshfs`

https://github.com/libfuse/sshfs

Allowed standalone flags: –help, –version, -h, -V

`tcpdump`

https://www.tcpdump.org/manpages/tcpdump.1.html

Allowed standalone flags: –help, –version, -?, -A, -B, -C, -D, -G, -K, -L, -M, -N, -O, -P, -Q, -S, -U, -W, -X, -Z, -c, -d, -e, -f, -h, -i, -j, -l, -n, -p, -q, -r, -s, -t, -u, -v, -w, -x, -y
Allowed valued flags: –immediate-mode, –snapshot-length, –time-stamp-precision, –time-stamp-type, -B, -c, -C, -E, -F, -G, -i, -j, -M, -Q, -r, -s, -T, -w, -W, -y, -z, -Z
Hyphen-prefixed positional arguments accepted

`traceroute`

https://man7.org/linux/man-pages/man8/traceroute.8.html

Aliases: traceroute6

Allowed standalone flags: –help, –version, -4, -6, -F, -I, -T, -U, -V, -d, -e, -h, -n, -r, -v
Allowed valued flags: –port, –queries, –sendwait, –wait, -f, -i, -m, -N, -p, -q, -s, -t, -w, -z

`traefik`

https://doc.traefik.io/traefik/reference/cli-overview/

healthcheck: Flags: –help, -h. Valued: –api.dashboard, –api.entryPoint, –api.insecure, –ping.entryPoint
help: Positional args accepted
version: Flags: –help, -h
Allowed standalone flags: –help, –version, -h, -v

`tshark`

https://www.wireshark.org/docs/man-pages/tshark.html

Allowed standalone flags: –help, –version, –list-time-stamp-types, -?, -2, -A, -B, -D, -F, -K, -L, -M, -N, -O, -P, -Q, -S, -T, -U, -V, -W, -X, -Y, -Z, -a, -b, -c, -C, -d, -e, -E, -f, -h, -i, -j, -l, -n, -o, -p, -q, -r, -s, -t, -u, -v, -w, -x, -y, -z
Allowed valued flags: -A, -B, -D, -F, -G, -N, -O, -P, -S, -T, -W, -X, -Y, -Z, -b, -c, -C, -d, -e, -E, -f, -i, -j, -l, -n, -o, -p, -r, -s, -t, -w, -y, -z
Hyphen-prefixed positional arguments accepted

`unbound-host`

https://nlnetlabs.nl/documentation/unbound/unbound-host/

Allowed standalone flags: -h, -v, -d, -D, -r, -4, -6
Allowed valued flags: -c, -t, -y, -f, -F, -C

`wget`

https://www.gnu.org/software/wget/

Allowed standalone flags: –ask-password, –auth-no-challenge, –background, –backup-converted, –backups, –cache, –certificate-type, –check-certificate, –config, –connect-timeout, –content-disposition, –continue, –convert-file-only, –convert-links, –cookies, –cut-dirs, –debug, –delete-after, –directory-prefix, –dns-cache, –dns-timeout, –dont-remove-listing, –egd-file, –exclude-directories, –exclude-domains, –execute, –follow-ftp, –follow-tags, –force-directories, –force-html, –ftp-password, –ftp-stmlf, –ftp-user, –header, –help, –hsts, –hsts-file, –html-extension, –http-keep-alive, –http-password, –http-user, –ignore-case, –ignore-length, –ignore-tags, –include-directories, –inet4-only, –inet6-only, –input-file, –input-metalink, –keep-badhash, –keep-session-cookies, –level, –limit-rate, –load-cookies, –local-encoding, –max-redirect, –metalink-index, –metalink-over-http, –mirror, –no-check-certificate, –no-clobber, –no-config, –no-cookies, –no-directories, –no-dns-cache, –no-glob, –no-host-directories, –no-hsts, –no-http-keep-alive, –no-iri, –no-parent, –no-passive-ftp, –no-proxy, –no-remove-listing, –no-use-server-timestamps, –no-verbose, –no-warc-compression, –no-warc-digests, –no-warc-keep-log, –output-document, –output-file, –page-requisites, –passive-ftp, –password, –post-data, –post-file, –prefer-family, –preserve-permissions, –private-key-type, –progress, –protocol-directories, –proxy, –proxy-password, –proxy-user, –quiet, –quota, –random-file, –random-wait, –read-timeout, –recursive, –referer, –regex-type, –reject, –reject-regex, –rejected-log, –relative, –remote-encoding, –report-speed, –restrict-file-names, –retr-symlinks, –retry-connrefused, –retry-on-http-error, –save-cookies, –save-headers, –server-response, –show-progress, –span-hosts, –spider, –start-pos, –strict-comments, –timeout, –timestamping, –tries, –unlink, –use-askpass, –use-server-timestamps, –user, –user-agent, –verbose, –version, –wait, –waitretry, –warc-cdx, –warc-dedup, –warc-file, –warc-header, –warc-max-size, –warc-tempdir, –xattr, -4, -6, -A, -B, -D, -E, -F, -H, -I, -K, -L, -N, -O, -P, -Q, -R, -S, -T, -U, -V, -X, -Y, -a, -b, -c, -d, -e, -h, -i, -k, -l, -m, -nc, -nd, -nh, -nv, -o, -p, -q, -r, -s, -t, -v, -w, -x, -Z
Allowed valued flags: –certificate, –certificate-type, –ciphers, –config, –connect-timeout, –cookies, –crl-file, –cut-dirs, –dns-servers, –dns-timeout, –domains, –exclude-directories, –exclude-domains, –execute, –follow-tags, –ftp-password, –ftp-user, –header, –http-password, –http-user, –ignore-tags, –include-directories, –input-file, –input-metalink, –limit-rate, –load-cookies, –local-encoding, –max-redirect, –metalink-index, –output-document, –output-file, –password, –post-data, –post-file, –prefer-family, –preferred-location, –private-key, –progress, –proxy-password, –proxy-user, –quota, –random-file, –read-timeout, –referer, –regex-type, –reject, –reject-regex, –rejected-log, –remote-encoding, –restrict-file-names, –retry-on-http-error, –save-cookies, –secure-protocol, –start-pos, –timeout, –tries, –user, –user-agent, –wait, –waitretry, –warc-file, –warc-header, –warc-max-size, –warc-tempdir, -A, -B, -D, -I, -O, -P, -Q, -R, -T, -U, -X, -a, -e, -i, -l, -o, -t, -w
Hyphen-prefixed positional arguments accepted

`whois`

https://man7.org/linux/man-pages/man1/whois.1.html

Allowed standalone flags: –help, –version, -A, -B, -G, -H, -I, -K, -L, -M, -Q, -R, -S, -a, -b, -c, -d, -f, -g, -l, -m, -r, -x
Allowed valued flags: -T, -V, -h, -i, -p, -s, -t

`xh`

https://github.com/ducaale/xh

Allowed standalone flags: –all, –auth-type, –bearer, –body, –check-status, –continue, –curl, –curl-long, –debug, –download, –follow, –form, –headers, –help, –ignore-netrc, –ignore-stdin, –insecure, –json, –multipart, –no-style, –offline, –overwrite, –print, –quiet, –raw, –stream, –style, –verbose, –version, -?, -A, -F, -I, -S, -b, -c, -d, -f, -h, -j, -m, -o, -p, -q, -s, -v
Allowed valued flags: –auth, –auth-type, –bearer, –cert, –cert-key, –max-redirects, –max-redirects, –output, –print, –proxy, –read-config, –session, –session-read-only, –ssl, –style, –timeout, –verify, -A, -a, -o, -p
Hyphen-prefixed positional arguments accepted

`yt-dlp`

https://github.com/yt-dlp/yt-dlp

Aliases: youtube-dl

Allowed standalone flags: –abort-on-error, –abort-on-unavailable-fragment, –add-metadata, –allow-playlist-files, –audio-multistreams, –check-all-formats, –check-formats, –clean-info-json, –continue, –default-search, –dump-pages, –dump-single-json, –embed-chapters, –embed-info-json, –embed-metadata, –embed-subs, –embed-thumbnail, –extract-audio, –flat-playlist, –force-generic-extractor, –force-ipv4, –force-ipv6, –force-write-archive, –get-comments, –get-description, –get-duration, –get-filename, –get-format, –get-id, –get-thumbnail, –get-title, –get-url, –hls-prefer-ffmpeg, –hls-prefer-native, –hls-use-mpegts, –ignore-config, –ignore-errors, –ignore-no-formats-error, –keep-fragments, –keep-video, –legacy-server-connect, –list-formats, –list-subs, –list-thumbnails, –mark-watched, –mtime, –newline, –no-abort-on-error, –no-add-metadata, –no-call-home, –no-check-certificate, –no-clean-info-json, –no-color, –no-colors, –no-config, –no-continue, –no-cookies, –no-embed-chapters, –no-embed-info-json, –no-embed-metadata, –no-embed-subs, –no-embed-thumbnail, –no-fixup-comments, –no-format-sort-force, –no-get-comments, –no-keep-fragments, –no-keep-video, –no-mark-watched, –no-mtime, –no-overwrites, –no-part, –no-playlist, –no-playlist-reverse, –no-post-overwrites, –no-progress, –no-quiet, –no-resize-buffer, –no-restrict-filenames, –no-simulate, –no-skip-unavailable-fragments, –no-split-chapters, –no-update, –no-warnings, –no-write-annotations, –no-write-archive, –no-write-auto-subs, –no-write-comments, –no-write-description, –no-write-info-json, –no-write-link, –no-write-playlist-metafiles, –no-write-subs, –no-write-thumbnail, –no-write-url-link, –overwrites, –paths-only, –playlist-random, –playlist-reverse, –prefer-free-formats, –print-json, –print-to-file, –print-traffic, –progress, –quiet, –resize-buffer, –restrict-filenames, –reverse-playlist, –simulate, –skip-download, –skip-unavailable-fragments, –split-chapters, –verbose, –version, –write-annotations, –write-auto-subs, –write-comments, –write-description, –write-info-json, –write-link, –write-playlist-metafiles, –write-subs, –write-thumbnail, –write-url-link, –xattrs, -4, -6, -F, -J, -c, -h, -i, -j, -k, -q, -s, -v, -w, -x
Allowed valued flags: –add-headers, –audio-format, –audio-quality, –batch-file, –bidi-workaround, –break-match-filter, –break-on-existing, –break-per-input, –buffer-size, –cache-dir, –client-certificate, –client-certificate-key, –client-certificate-password, –compat-options, –concurrent-fragments, –convert-subs, –convert-thumbnails, –cookies, –cookies-from-browser, –cookies-from-firefox, –credentials, –datebefore, –dateafter, –download-archive, –download-sections, –encoding, –extractor-args, –extractor-retries, –ffmpeg-location, –file-access-retries, –fixup, –force-overwrites, –format, –format-sort, –format-sort-force, –fragment-retries, –geo-bypass, –geo-bypass-country, –geo-bypass-ip-block, –http-chunk-size, –id, –impersonate, –limit-rate, –load-info-json, –match-filter, –match-title, –max-downloads, –max-filesize, –max-sleep-interval, –merge-output-format, –min-filesize, –min-sleep-interval, –netrc-location, –no-allow-unplayable-formats, –output, –output-na-placeholder, –paths, –password, –playlist-end, –playlist-items, –playlist-start, –port, –print, –proxy, –recode-video, –referer, –reject-title, –remux-video, –rendezvous, –retries, –retry-sleep, –rm-cache-dir, –socket-timeout, –source-address, –sponsorblock-api, –sponsorblock-chapter-title, –sponsorblock-mark, –sponsorblock-remove, –sub-format, –sub-langs, –sub-format-fallback, –throttled-rate, –trim-filenames, –twofactor, –user-agent, –username, –video-multistreams, –video-password, –wait-for-video, –write-pages, –xff, -N, -P, -R, -S, -T, -a, -f, -o, -p, -r, -t, -u

Examples:

yt-dlp https://example.com/v
yt-dlp -f best https://example.com/v
yt-dlp -x --audio-format mp3 https://example.com/v
yt-dlp --write-subs --sub-langs en https://example.com/v
yt-dlp -o 'out.%(ext)s' https://example.com/v
yt-dlp --download-archive done.txt https://example.com/p
yt-dlp -F https://example.com/v
yt-dlp --proxy http://proxy:8080 https://example.com/v
youtube-dl https://example.com/v

Keyboard shortcuts

safe-chains